Tuesday, March 27, 2012

Catatan Program Fasttrack 1: Seminar Online Pertama

Hari ini untuk pertama kalinya mahasiswa fasttrack dari seluruh Indonesia (UGM, UI, ITB, Undip) melakukan seminar online. Walaupun agak sebal di awal, karena pemberitahuan tentang teknis pelaksanaan seminar online hari ini baru diberikan kemarin siang jam 1 siang, hal ini tetap harus dijalani sebagai bagian dari rangkaian program fasttrack. Secara pribadi, saya mendukung penuh rangkaian program ini, baik konsep pemberian beasiswa kuliah s2 sejak mahasiswa menjalani semester 7 di program s1 nya, kewajiban melakukan ISR (Intellectual Social Responsibility) berupa mengajar di SMA/SMK, membuat blog, sampai kewajiban melakukan seminar (seperti seminar online hari ini). Mungkin beberapa teman ada yang masih mengeluh, tapi saya tahu benar kalau semua ini dibuat demi kebaikan kita sendiri.
Seminar online hari ini dimulai pk 8.30 pagi. Jujur saja, konsep seminar online yang pertama ini kurang jelas. Tidak adanya daftar pemateri sampai acara yang tidak sesuai dengan jadwal masih terjadi. Saya tidak mengikuti seminar online dari pagi hari baik melalui website www.seamolec.org/ft maupun menonton langsung di lantai 2 Gedung MST UGM. Alasan saya cuma karena saya ada kuliah dan kegiatan lain yang lebih dulu sudah saya sanggupi. Sekitar jam 11 siang saya melihat lewat website seamolec, dan masih ada beberapa kendala teknis untuk streaming langsung. Walaupun demikian, saya salut dengan ide seminar online ini. Saya lebih setuju bahwa mahasiswa dibebaskan untuk menonton seminar dari manapun karena toh tidak semua topik yang diseminarkan akan menarik perhatian semua orang.
Saya datang ke gedung MST pk 12.30 untuk persiapan seminar online pk 13.55. tetapi ternyata pk 13.00 tiba-tiba seminar online di UGM ditunda untuk sementara waktu karena ada penjelasan dari Pak Jaslin dan Pak Agus tentang program fasttrack. Thank's God! Baru saja semalam saya email pihak seamolec mengenai kejelasan program ini. Saya kurang tahu di mana hambatannya sehingga UGM terkesan selalu tertinggal dalam berbagai informasi mengenai program fasttrack (seperti tentang teknis seminar online hari ini, teknis mengajar di SMA, banyaknya biaya s2 yang diperoleh, dll). Pertemua siang ini cukup memberi kejelasan dan kepastian mengenai ISR. Setelah dijelaskan dan dipastikan bentuk ISR dan prosedur monitornya tentu pihak mahasiswa akan lebih mudah untuk melaksanakannya (dan pihak penyelenggara dapat menetapkan punishment jika aturan yang telah jelas dilanggar). Memang akhirnya saya tidak jadi seminar online karena tidak cukupnya waktu. Hmmm,,, mungkin kesempatan berikutnya baru kesempatan bagi saya. Pada saat tulisan ini dibuat saya masih berusaha mengakses situs seamolec untuk melihat-lihat hasil seminar online dari Universitas lain, tapi websitenya tidak bisa terbuka juga. *semoga tidak terjadi masalah yang serius di web ini. Haha.

Thursday, March 8, 2012

Brief Overview of Heat Exchanger

n the chemical processing industry, there are numerous types of heat exchanger devices. The types of exchangers can be classified by the duty that they perform, surface compactness, construction features, flow arrangements, and others. In general, a heat exchanger can fall into one of these processing categories:

1. No Phase Change
  • Liquid to Liquid heat transfer
  • Liquid to Gas heat transfer
  • Gas to Gas heat transfer

Heat Exchanger Equation

If we take a closer look at the heat exchanger equation, it's worth noting some assumptions that are made in its derivation. First, the overall heat transfer coefficient and the specific heat (also called heat capacity) of the fluids are assumed to remain constant through the heat exchanger.
If we look at the change in the heat capacity of water, for example, over a reasonable temperature range, here is what we find:
Specific heat of water at 100 °F and atmospheric pressure = 0.9979 Btu / lb °F
Specific heat of water at 210 °F and atmospheric pressure = 1.0066 Btu / lb °F
So, we can see that this is a fairly reasonable assumption for water and it remains reasonable for most industrial fluids. The specific heat of a substance is defined as the amount of heat required to raise the temperature of one pound of the substance by a single degree Fahrenheit (other units can apply as well).

Basics of Industrial Heat Transfer

Heat transfer is one of the most important industrial processes. Throughout any industrial facility, heat must be added, removed, or moved from one process stream to another. Understanding the basics of the heart of this operation is key to any engineers' mastery of the subject.

There are three basic types of heat transfer: conduction, convection, and radiation. The two most common forms encountered in the chemical processing industry are conduction and convection. This course will focus on these key types of heat transfer.

In theory, the heat given up by the hot fluid is never exactly equal to the heat gained by the cold fluid due to environmental heat losses. In practice, however, they are generally assumed to be equal to simplify the calculations involved. Any environmental losses are generally minimized with insulation of equipment and piping.

Any overall energy balance starts with the following equations:

Wednesday, March 7, 2012

Interesting Facts About Wood Furnaces

Wood furnaces are direct fire heaters. It is a convenient and economical way of heating homes. Many Americans, Europeans, Canadians and people from other countries who experience very cold weather or climate use this kind of unit.
Many users nowadays prefer using wood furnaces to save the Earth from greenhouse effect. Burning bio-mass fuels does not increase the risk of carbon dioxide in the atmosphere. Since wood is a renewable resource safe for the environment, it can also conserve energy.
There are three main types of wood furnaces. First is the Central Wood Furnaces. It can be installed inside the house, garage, mechanical room or at the basement. It uses either a type of forced-air or hot-water system to distribute heat throughout the house.
The second type is the Multi-Fuel Furnaces. This unit can be placed inside or outside the house. It enables the burning of different kinds of fuel like coal, oil, gas and wood. These types are flexible that can work as a back-up option, especially when using other kinds of fuel. It is appropriate in cases where there is only one chimney outlet available. The machine allows venting of the wood as well as the fossil fuel so as to exhaust-up the same pipe.
The third type is the Outdoor Furnace or Boilers. This unit utilizes firewood, particularly when there is a huge supply. It keeps the smoke, mess and bugs outside. The furnace is similar to a small utility building. It is a wood burning furnace placed outdoors. It can be found along the yard, between 50 and 150 feet away from the house.
The furnace firebox is surrounded by a water jacket. As heat is released, it is transferred from the fire onto the water. It is then pumped through insulated pipes and placed underground, then into your house. Finally, heat radiates to warm up the entire house.
On the downside, this unit needs some boots, gloves and a cap to slog out onto the blowing snow to keep it going. Many outdoor boilers are hard to control for a clean burn due to their oversized firebox. Aside from this, it tends to smoke a lot during automatic restart after a long off cycle.
All these wood furnaces are controlled by a thermostat similar to other heating systems. Different heating systems are used on working on these types.
The forced hot-air systems use heat exchangers. The warm air spreads out with ductwork. Burning fuel causes the heat exchanger to heat-up. However, there is no heat storage capacity in this system. The unit needs to be re-fueled everyday to maintain its temperature during the cold months. It is also easy to add filtration, air-conditioning and humidification because the air in this system is being re-circulated. Hydro-air units use ductworks to help distribute air similar to forced hot-air systems. The heat exchanger is replaced by a hot water coil being heated by a hot water loop from its boiler. There are multiple hydro-air units that can be fed by a single boiler throughout the sections of the house for different cool zones. This kind of system is always combined with air-conditioning.
A combination central-heating unit system is designed to burn wood, oil or gas. It relies on the back-up fuel when the wood is not convenient for usage. Both combustion chambers can be maximized with this design. The two fuels are not usually used simultaneously. It can either be hot-air or hot-water furnaces. The disadvantage of this unit is that it tends to be twice as expensive as a single-fuel heater. This dual system offer maximum fueling flexibility.
Wood furnaces have disadvantages also. Some needs to be refueled several times and are a bit dirty to operate. It is also not always convenient to gather fire woods. And to produce good heat, you must know how to stack these pieces of wood properly. Lastly, all these units require electricity due to its thermostat.

Source:
heatexchanger.blogspot.com

Tuesday, March 6, 2012

Chemical Engineer Salary

Salary Overview

There are a number of different statistics and estimates for the projected annual salary of someone employed as a chemical engineer in the United States. According to statistics provided by the Bureau of Labor, there are approximately 29,000 chemical engineers working in the country, and the mean annual wage is $91,670. The middle 50 percent of people employed as chemical engineers obtain an annual wage of $88,280 with an hourly wage of $42.44. The lowest 10 percent obtain an annual wage of $56,090 with an hourly wage of $26.97, while the highest 10 percent obtain an annual wage of $132,980 with an hourly wage of $63.93. The industries with the highest employment rates in chemical engineering are architectural engineering, basic chemical manufacturing, and scientific research and development areas. The highest paying industries for chemical engineering involve oil and gas extraction, management, technical, and scientific consulting, and motor vehicle part manufacturing.

Job Description and Outlook

The job of a chemical engineer is to use different principles, concepts, and theories related to chemistry and engineering to solve novel problems that involve how chemicals may be produced or used or combined with other products. Chemical engineers may be involved in a number of processes in chemical manufacturing, such as designing equipment and procedures, or planning and testing methods involved in products and byproducts. They are also likely to be involved in supervising the production of items manufactured through the manipulations of chemicals and plastics. Chemical engineers may also work in a number of industries related to manufacturing besides chemical manufacturing, such as industries involved in the production of electronics, energy (in particular, oil and gas), food, paper, and clothing. Chemical engineers can also find employment in health care, education, and bio technology.
The outlook for chemical engineering as a profession in the United States is healthy; the profession is projected to grow on a rate comparable to the average growth rate of most professions; however, the specific growth rate will vary by the specialty of chemical engineering an individual works in. Chemical engineers involved in the chemical manufacturing industry may actually face a slight decline in employment opportunities over the coming decade, although there will continue to be a number of chemical companies that employ chemical engineers for research and development purposes. Chemical engineers will continue to be in demand in applications and industries involving energy, particularly the industries involved with extraction and refinement of oil and natural gas from the world’s oceans. There will also be a need for engineers versed in safety practices to reduce the likelihood of disasters occurring from industrial incidents, such as oil spills and chemical fires and explosions. There is also expected to be employment growth for chemical engineers who participate in industries related to the provision of services, such as technical services, scientific services, and professional services. The fields of nano technology and bio technology are in rapid development, and chemical engineers will likely be able to seek employment in these fields due to their credentials in engineering and expertise in the manipulation of chemicals and related products.

Training and Education Requirements

The typical terminal requirement in most areas of employment for a potential chemical engineer is a doctoral degree. There are some areas and fields where it may be possible to find employment without a terminal degree, such as in the Federal Government, but the default expectation is for candidates to have completed their education with a Ph.D., and in certain sub industries, having real life work experience is also desirable.
It is possible in many cases to work with a bachelor’s degree in supportive roles as a chemical engineer, depending on the setting and the needs of the employer. In fact, chemical engineers earn among the highest starting salaries of any workers with bachelor’s degrees, and chemical engineers who obtain experience in petroleum engineering may be able to negotiate higher salaries and more opportunities without much trouble. Many employers will pay their employees to further their education.

Certifications

It is usually not necessary to obtain certification to begin working as a chemical engineer. However, there can be benefits to seeking voluntary certification from different professional organizations, such as higher salaries within current locations of employment and access to more lucrative employment opportunities. There are a number of professional associations and organizations from which certification as a chemical engineer may be obtained. The specific requirements for obtaining certification as a chemical engineer will vary from one association to the next. Many organizations request a particular amount of formalized education and post doctorate work, while others are more interested in years of work experience. Still others may ask for a combination of work experience and degrees accumulated through formal education and schooling.

Professional Associations

There are a number of organizations and associations in the chemical engineering industry that offer certification to chemical engineers.
  • The American Chemical Society
  • The American Institute of Chemical Engineers
  • The Electrochemical Society
  • The National Organization for the Professional Advancement of Black Chemists and Chemical Engineers
  • The American Hydrogen Association
  • The Association of Energy Engineers
Source:
www.highersalary.com

How Long Will Our Earth Provide Us With The Oil We Need??

The Oil and Gas Industry is doing well. As everyone knows, the price for oil has gone up significantly over the last years. Within every kind of market, the price is set and set by the supply and demand balance. At the moment countries such as India and China are booming markets. Their economies are growing with big numbers every year. As their economy continues to grow, so does the demand for gas and oil. This also means that the production facilities must expand. The current consumption of oil in the world is nearly equivalent to the total amount of production facilities- and for this reason relatively small events in the world can have a big impact on the oil price at the moment. Wars and other major events such as hurricane Katrina have an even bigger impact on the price since they created great concerns and worries for the buyers, which pushed the price further up.

In the near future the fragile balance between supply and demand will not fade so quickly. The demand for oil is still increasing in western countries, but also in the fast growing countries such as India and China.

Although prices are high at the moment, when seen on the historic scale this does not mean that the price is indeed high when compared to the current market situation and future of oil reserve. Some say oil should be double or quadruple of the current price to fill the gap between oil and renewable energy sources, but higher prices will automatically make alternative energy resources more economical.

Currently it is expected that the world's demand for oil will increase about 2% per year in the first 25 years of the 21st century, according to the Energy Information Agency of the U.S. government. This makes it very clear that oil and gas companies will have to increase their production facilities to pump more oil and refine it into the products needed to keep the world economy going and growing. 

Source:
http://www.hirednotfired.com